Ejektoinzenjering d.o.o

  • Company for the production and sale of ejectors - injectors

  • Smaller size for more power

Order Form

Data needed to order

sema_ejektora1 dimenzije_ejektor Where: Q1, Q2, Q3 – volume flows in (m3/s) or (m3/h), ρ1, ρ2, ρ3 – density in (kg/m3), p1, p2, p3 – pressure in (bar), recommended in (bar abs). Indexs: 1 - transmission fluid at the entrance to ejector, 2 - suctioned fluid at the entrance to ejector, 3 - mixture of driving fluid and suctioned fluid on exit ejector. When ordering ejektora should include the following information:
  • Density in the ρ1and  ρ2 (kg/m3);
  • Mass flows of m1 and m2 or at least one of them in kg/s or volume flows Q1 and Q2, or at least one of them in m3/s;
  • Of the three pressure p1, p2 and p3 the two must be given to the bar or bar abs;
  • If you were given all three of pressure it can be given only one mass or volume flow;
  • Instead of mass flow rate can be set volume flows.

Ejector dimensions by the flow

Size Max flow DN attachments Size (mm)
- Q3 (kg/h) A B C a b c
1 1200 20 20 20 40 80 150
2 3500 25 20 32 60 85 370
3 6000 32 25 40 65 100 350
4 12000 40 32 50 70 115 410
5 24000 50 40 65 80 125 480
6 32000 65 40 65 80 125 480
7 40000 65 50 80 80 125 530
8 70000 80 65 100 115 135 730
9 100000 100 80 125 150 165 950

Form

Select the parameters and send them to us, and we will as soon as possible answer whether we are able to create ejector according to your needs. Fill in the fields. It is not necessary to enter all the parameters, but only as explained on previous page. Please fill your information in order for us to be able to contact you. All your data will be stored securely and will not be used for purposes other than for our information about you.





















    Top